How to Change Strap on Fitbit Charge 6

How to Change Band on Charge 6

When it comes to lightweight fitness trackers like the Fitbit Charge 6, your watch strap really speaks volumes, not just about your fashion sense but also your comfort, performance, and commitment to your fitness goals.  In fact, according to Fitbit’s own community forums, one of the most frequently asked questions post-purchase is:
“How do I change the strap on my Fitbit Charge 6?”

So, whether it’s a post-workout soak in the pool, a strap that feels too stiff during yoga that needs changing, or simply wanting to match your watch band to your latest outfit, switching it up can completely transform your device in seconds. 

The good news, though, is that swapping your watch band is quick and easy and opens the door to a world of fitness tech customisation.

So, let’s walk you through how to change the strap on Fitbit Charge 6 step by step.

🎯 Looking to level up your strap for your Charge 6?

👉 Shop the full range of Charge 6 Straps here — premium quality, device specific fit & fully fitness-ready.

How to Change Strap on Fitbit Charge 6: A Step-by-Step Guide

If you’re wondering how to change strap on Fitbit Charge 6 or have searched how to change band on Charge 6, you’ll be delighted to know it’s surprisingly straightforward. No tools are needed and minimal stress,  just a couple of well-placed clicks under the guidance of the below steps. It shouldn’t take more than a minute: 

🧭 Step 1: Flip Your Device Over

Place your Fitbit Charge 6 face-down on a soft cloth or clean table or workbench. You’ll see two small buttons where the watch band connects to the fitness tracker, one on each side.

🔓 Step 2: Locate the Watch Band’s Release Buttons

Each watch band has its own spring-loaded release latch. These are flat, textured buttons built directly into the watch band connector.

👆 Step 3: Slide the Release Button Inward

Using your fingernail, gently press on the latch inward, in the direction of the watch strap. You should now feel it move really slightly. While you continue holding it, slide the watch strap sideways away from your device. It will slide out smoothly when the button is pressed far enough.

Now repeat the same motion on the opposite side.

🔁 Step 4: Clip on Your New Watch Strap

Before you take your new watch strap, make sure it’s fully Charge 6 compatible and has been purchased from a reliable supplier such as Fitbit or FitstrapsUK, as you don’t want to risk damage to your device. If you are happy with this, now align the connector with the groove on the side of the fitness tracker. Slide it in until you hear or feel a soft clicking noise; that’s how you know it’s securely locked in place.

Now repeat this across on the other side. Give both sides a gentle tug to confirm they’re firmly clipped in. 

✅ That’s It. You’re Done!

Seriously, that’s it. No screwdrivers, no tech wizardry needed, just a quick and simple change, and you're ready for your next workout, office meeting or night out.

Want to make sure you don’t accidentally damage your new strap during installation? We’ll cover the most common mistakes next 👇

❓Got a Fitbit Versa 4 instead? Don’t worry — we’ve got you covered too.

👉 Explore our full range of Fitbit Versa 4 straps here.

Common Mistakes to Avoid When Changing Bands on the Charge 6

As our guide made it look so easy, changing your Fitbit Charge 6 strap might seem foolproof, and for the most part, it actually is, but a few small missteps can cause unwanted fitness tech frustration (or worse, device damage). Whether you're swapping to a classic silicone band for the gym or a smart metal band for work, here are the top things we recommend that you avoid:

❌ 1. Forcing the Watch Band Without Pressing the Release Button

We’ve heard about this far too often: users try to aggressively yank their strap off without using the latch. This can damage the clip mechanism and lead to a loose fit over time. Always make sure that you press the release button down fully before sliding.

❌ 2. Using a Non-Compatible Strap

Not all watch bands fit all Fitbit models. The Charge 6 uses a specific connector design, so straps made for the Inspire, Luxe, or Charge 4 simply won’t fit. Stick to Charge 6-specific straps to avoid mismatched fittings or weak connections. For the full lowdown on Fitbit Strap compatibility, read this article. 

❌ 3. Not Listening for the Click

When attaching your fresh new strap, you should hear or feel a soft ‘click’ sound, this means the watch band has locked into place correctly. If it slides in but doesn't click, don’t start using it quite yet! Try reinserting the strap until it feels fully connected and secure.

❌ 4. Ignoring Sweat or Dirt in the Connector Area

If you wear your Fitbit during workouts (as most do), sweat and grime can build up around the connectors. Clean the area with a microfibre cloth before inserting a new strap to avoid friction or misalignment.

🧼Always make sure you clean your Fitbit strap properly to keep it fresh and odour-free, especially if you're training daily.

❌ 5. Choosing the Wrong Material for Your Lifestyle

This one’s less technical but just as important. Silicone’s great for sport, but not for boardroom meetings. Metal’s stylish, but can chafe during long runs. Always choose a strap that suits your day-to-day routine (don’t worry — we’ll help you pick the right one next 👇).

🏋️For Fitness First Users: Sports Style Watch Bands

If your Charge 6 is rarely off your wrist,  from the squat rack to the spin bike, go for a sports-style silicone band from Fitstraps.

• Sweat-resistant
  
  

• Easy to clean
  
  

• Breathable options available (like perforated designs)
  
  

Tip: Look for secure fastening systems like buckle-and-tuck or looped clasps to avoid mid-workout slippage.

👔 For Everyday Wear: Nylon Fabric Bands

Lightweight, flexible and soft against the skin, nylon bands are ideal for all-day wear.

• Great for sensitive skin
  
  

• Ideal if you suffer from irritation or strap rash
  
  

• Stylish without being flashy
  
  

Pair them with a neutral colour, and you’ve got a go-anywhere look.

💼 For Office or Smarter Occasions: Metal Straps

Yes, fitness tech can look professional for work and smarter occasions. Metal watch bands, especially in black, silver or rose gold, elevate your Fitbit from gym gear to boardroom-ready.

• Durable stainless steel options
  
  

• Magnetic and clasped versions available
  
  

• Adds a premium feel without compromising on function
  
  

🎨 For Personality and Customisation: Colour Variety

At Fitstraps, we carry the widest range of premium quailty Fitbit Charge 6 strap colours in the UK because we know fitness isn’t one-size-fits-all.

Whether you’re team black-on-black or want something bolder and funkier, changing your strap to match your mood or outfit is the ultimate hack to keep your fitness tracker feeling fresh.

Where to Buy Charge 6 Bands That Actually Fit and Last

There’s no shortage of places selling fitness watch bands online, but not all straps are created with an equal measure of design and care. A poor-quality strap can irritate your skin, snap under tension, or even fail to fit your Charge 6 properly.

That’s where FitstrapsUK can help.

🛠️ A Precision Fit, Model-Specific Design for the Charge 6

We don’t do generic device fit here at Fitstraps. Every Fitbit strap we sell is made to fit its specific model, meaning if you’re buying for the Charge 6, it’ll fit the Charge 6. No guesswork, no adapters, and no risky stretching or trimming.

🎯 Built for Active Lifestyles

Whether you're clocking up steps in the Peak District or doing interval training at the gym, your strap needs to keep up.
Our Charge 6 range includes:

• High-performance, premium-grade silicone bands
  
  

• Comfort-first nylon fabric straps
  
  

• Smart, secure metal options
  All made to last, even with daily wear and heavy sweat.
  
  

👉 Explore all Fitbit Charge 6 Straps here, and make your Charge 6 truly yours.